ProDino WiFi V1

The KMP ProDino WiFi V1.0 connects your Arduino to the internet wirelessly. Connect it to your wireless network by following a few simple instructions to start controlling your world through the internet. Plus RS485 connection, GROVE , UEXT, some digital and analog inputs/outputs and a few relays. It is the base device to extend your project to the IoT world. You can control sensors and actuators via the Internet as a client or a server. Also you can use it lots of and vary projects. We present you our KMP ProDino WiFi board:

ProDino WiFi V1.0 box 3D

The ProDino WiFi is a microcontroller board powered by Espressif System's own ESP8266 WROOM-02 module with 2 MB Flash. It has 4 digital optical isolated inputs, 4 relays outputs, 2 digital and 1 analog input/output pins, 2GROVE connectors, 1 UEXT, a RS485 communication connector, a micro USB connector, a header by programming, a flash button and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable and power it and get started.

Communication


The ProDino WiFi V1.0 has a number of facilities for communicate with other WiFi device, a computer, another Arduino board, vary devices support RS485, Ethernet devices (connected to WiFi router), sensors or other microcontrollers. A wired connection you can made through RS485 protocol. The RS485 communication supports easy link with many and different type of devices.

The ESP8266 WROOM-02 Module is a self contained SOC (system on chip) with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 WROOM-02 is capable of either hosting an application or support Wi-Fi networking functions.

This module has a powerful enough on-board processing and storage capability that allows it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. There is an almost limitless fountain of information available for the ESP8266 WROOM-02, all of which has been provided by amazing community support. In the Tutorial section below you will find many resources to aid you in using the ESP8266 WROOM-02, even instructions on how to transforming this module into an IoT (Internet of Things) solution!

ProDino WiFi V1.0 board Base Top

Top

ProDino WiFi V1.0 box board back

Bottom

Getting started


You can find in the Tutorial section all the information you need to configure your board, use the Arduino Software (IDE), and start tinker with coding and electronics. What you can do with this board see in our Examples.

Features 


  • Wi-Fi module Espressif ESP8266 WROOM-02
  • Wi-Fi Direct (P2P), soft-AP
  • check
    Integrated TCP/IP protocol stack 
  • check
    Integrated TR switch, balun, LNA, power amplifier and matching network
  • check
    Integrated PLLs, regulators, DCXO and power management units
  • check
    Integrated low power 32-bit CPU could be used as application processor
  • Integrated low power 32-bit CPU could be used as application processor
  • check
    2 x GROVE connectors 1 external and 1 internal 
  • check
    1 x UEXT internal connector 
  • check
    4 Relay Outputs 
  • check
    4 Optical Isolated Inputs 
  • check
    RS485 port 
  • check
    Switching Regulator power supply
  • check
    Arduino compatible

Specification


  • check
    802.11 b/g/n
  • check
    2MB Flash Memory 
  • check
    Power down leakage current of <10uA 
  • check
    +19.5 dBm output power in 802.11b mode
  • check
    Wake up and transmit packets in < 2ms 
  • check
    Optical isolated digital Inputs: 4 (working voltage 1.5-30 V, On arrives form 1.5V )
  • check
    Relay outputs: 4 (maximum voltage/current 250V/5A)
  • check
    Input Voltage: (Power supply) 6 - 30 VDC
  • check
    Dimension: 70 mm X 92 mm X 32 mm
  • check
    Weight: 126 g
ProDino WiFi V1.0 board 3D

Dimension


All dimensions are in mm

ProDino WiFi V1.0 Dimensions

Additional connectors


ProDino WiFi GROVE

GROVE

PRODINo WiFi UEXT PINS

UEXT

Pins mapping


External J10 Grove Digital 

  • 1 - EXT_GROVE_D0 - Primary digital Input/Output It is same for J12 INT_GROVE_D1
  • 2 - EXT_GROVE_D1Secondary digital Input/Output
  • 3 - Vcc  - Powering Grove module 3,3 V
  • 4 - GND  - Ground

Internal J12 Grove Mixed (Analog/Digital) 

  • 1 - INT_GROVE_A0 -

    Primary analog Input/Output

    (the value is divided 2)

  • 2 - INT_GROVE_D1 - Secondary digital Input/Output It is same for J10 EXT_GROVE_D0
  • 3 - Vcc  - Powering Grove module 3,3 V
  • 4 - GND  - Ground

UEXT (internal)

  • 1 +3.3 volt
  • caret-right
    2 - GND
  • caret-right
    3 - TXD 
  • caret-right
    4 -RXD
  • caret-right
    5 - SCL
  • 6 - SDA
  • caret-right
    7 - MISO
  • caret-right
    8 - MOSI
  • caret-right
    9 - SCK
  • caret-right
    10 - SSEL

What does the board consume?


Voltage

All relays off

All relays on

6 V

0.080 A

0.300 A

12 V

0.040 A

0.150 A

24 V

0.022 A

0.083 A

Optical isolated inputs when On state

1.5 V - 0.3 mA

5 V - 0.6 mA

12 V - 1.0 mA

24 V - 1.5 mA

Datasteets